A new bathroom in the UK costs about £5,000 to £8,500 for a standard job, according to three 2026 price guides. A budget job starts near £3,000. A high-end bathroom starts near £10,000 and can pass £15,000. The biggest price drivers are the fixtures you choose, the size of the room and whether the plumbing moves. Prices below are ranges from named sources. They are planning figures, not quotes.
How much does a bathroom renovation cost in the UK?
Three UK guides give very similar bands. The table lists the range each one gives for each scope. A “budget” job in these guides is a basic full replacement. It is not the same as a cosmetic refresh that keeps the tiles.
| Scope | Drench | MyJobQuote | Screwfix |
|---|---|---|---|
| Budget or basic | £3,000 to £5,000 | £3,500 to £4,500 | £3,000 to £5,000 (under 4 m2, 2-piece suite) |
| Mid-range | £5,000 to £8,000 | £6,000 to £8,000 | £5,500 to £8,500 (4 to 8 m2, 3-piece suite) |
| High end | £10,000 and up | £11,000 to £15,000 | £12,000 to £20,000 and up (over 9 m2) |
MyJobQuote gives an average of £7,000 for materials and labour. Its page is the newest of the three (updated July 2026). Drench posted its guide in June 2026. Screwfix shows no date on its guide. The mid-range bands agree within about £1,000. The top end differs most, because “high end” depends on the fittings you pick.
The sample photo used for the three budgets below. An original photo, not generated.
What does the same bathroom look like at three budgets?
The next three images start from the same photo. The room shape, window, door and camera angle stay as photographed. Only the finishes change.
Refresh. Keep the layout. Regrout, repaint, fit a new basin, tap and bath screen, and lay a new floor.
Generated with remyhomeai’s AI model from one sample photo.
Mid-range. Keep the layout. New tiles, a new bath, vanity unit, towel rail and floor.
Generated with remyhomeai’s AI model from one sample photo.
High end. Same room, upgraded fittings. Large-format stone-look tiles, a frameless glass bath screen, a wall-hung oak vanity and brass fittings.
Generated with remyhomeai’s AI model from one sample photo.
These images show looks, not prices or a build plan. The price of each look depends on the sources above and on your quotes.
What drives the price of a bathroom renovation?
Screwfix names three variables: the fixture specification, the floor area and structural plumbing changes. Other sources add a fourth, your location.
- Moving plumbing. Screwfix says moving the toilet or waste pipe can add up to 30% to labour, and suggests adding £500 to £1,000 to the budget if the layout changes.
- Fittings. Drench lists premium fixtures, digital showers, special-finish taps and freestanding roll-top baths as cost drivers.
- Tiling. Drench puts simple square tiles at around £50 per m2 for tiles and installation. Larger formats, patterns and stone-look tiles cost more. The porcelain vs ceramic tile post compares the two main options.
- Room size. More floor and wall area means more tiles and more labour.
- Older homes. Drench says older bathrooms often need extra electrical, ventilation and repair work.
- Region. MyJobQuote puts London at around £8,500, against £7,200 in the South East and £5,500 in the North East. Its national average is £7,000.
What do individual items cost?
These figures come from the same guides. Each has a different basis, so do not add them to make a total.
| Item | Figure | Source |
|---|---|---|
| Bathroom fitter, per day | £320 average, up to £480 | MyJobQuote |
| Plumber, per day | £325 to £450 | Screwfix |
| Tiler, per day | £200 to £350 | Screwfix |
| Tiles plus installation, simple square tiles | Around £50 per m2 | Drench |
| Skip hire | £220 average | MyJobQuote |
| Removing an old bath professionally | About £75 | Drench |
How long does a bathroom renovation take?
Screwfix says to allow 5 to 10 working days for a standard bathroom replacement. Drench says typical installation takes around a week. MyJobQuote gives 6 to 8 days in one place and 7 to 15 days in another. Plan for one to two weeks on site. Plan for longer if the plumbing moves or the tiling is complex.
An illustration for this article.
What are the rules for electrics in a UK bathroom?
Screwfix says electrical work near wet areas must be done by a Part P-registered electrician. It also covers powered storage, illuminated mirrors and demister pads.
Part P is the electrical safety section of the Building Regulations in England. Homebuilding & Renovating explains that a registered electrician can self-certify their own work, so you do not need to involve Building Control yourself. The government’s Approved Document P sets out when notification is required. This guidance is for England, so check the rules where you live. Ask your fitter to confirm what applies to your job, and ask for the certificate.
How can you save money on a new bathroom?
- Keep the layout. Leave the toilet, basin and waste where they are. This avoids the largest labour jump.
- Choose simple tiles. Plain square tiles cost less to buy and to lay than patterns or large stone-look formats.
- Spend on what you touch daily. A good shower and taps matter more than a decorative feature wall.
- Get several quotes. Ask each fitter for the same scope in writing, and ask whether the quote includes VAT, waste removal and the skip.
- Do the decorating yourself. Painting and clearing out the room are jobs most people can do.
An illustration for this article.
How can a design preview help before you get quotes?
Quotes work best when you know what you want. A fitter can price a clear brief. A vague one gets a wide range, and every change after the work starts costs more.
You can decide the look first. Upload one photo of your bathroom to remyhomeai, choose bathroom as the room type and see it in a style such as contemporary or minimalist. Compare tile colours, vanity styles and finishes on your actual room. The bathroom page explains how this works. If your room is small, the small bathroom ideas post covers layout and storage choices that make it feel bigger.
What remyhomeai does not do
remyhomeai cannot price a bathroom or list the materials for one. It draws no floor plans and cannot judge pipework, drainage or wall strength. Walls, windows, doors and the camera angle stay as photographed, so a new layout in an image is an idea, not a measured plan. A fitter must measure the room and price the job.
Sources
Prices reviewed October 2026.
- How Much Does a New Bathroom Cost in the UK in 2026?, Drench (posted June 2026): tiers, tiling per m2, installation time, cost drivers.
- New Bathroom Costs in the UK, MyJobQuote (updated July 2026): tiers, average, regional figures, fitter day rate, duration, skip hire.
- New Bathroom Cost Guide, Screwfix: size tiers, day rates, moving plumbing, duration, Part P.
- What is Approved Document P?, Homebuilding & Renovating (published August 2025): self-certification by a registered electrician.
- Electrical safety: Approved Document P, GOV.UK: the Building Regulation for electrical safety in dwellings in England.
Try it on your own room. See your room in a new style with 3 free credits at signup, no card required. One credit is one room photo.




