Skip to content
remyhomeairemyhomeai home

Renovation

Bathroom renovation cost in Australia: prices and waterproofing

Australian bathroom renovation cost by budget in AUD, with GST, the waterproofing line item, wet area rules, timing and ways to save before you get quotes.

remyhomeai team · · 8 min read

A dated bathroom before redesign
The same bathroom redesigned in a Mid-range refit style, with its windows, walls and camera angle unchanged
BeforeMid-range refit

Drag to compare. One room photo, restyled with remyhomeai's AI model.

A mid-range bathroom renovation in Australia costs about $15,000 to $35,000, and Three Birds, citing the Housing Industry Association (HIA), gives an average of around $26,000. A budget refresh starts near $8,000. A premium bathroom starts near $25,000 to $35,000. Waterproofing the wet area is a separate line item that you should not cut. Prices below are ranges from named sources in Australian dollars. They are planning figures, not quotes.

How much does a bathroom renovation cost in Australia?

Two 2026 guides give budget, standard and premium bands. Three Birds Renovations, a renovation company, reports the hipages bands in an article from January 2026. Your Property Guide reviewed its figures in September 2026, so it is the newest.

Scope Three Birds (citing hipages) Your Property Guide
Budget or cosmetic refresh $8,000 to $15,000 $8,000 to $15,000
Standard or mid-range $15,000 to $35,000 $15,000 to $22,000
Premium $35,000 and up $25,000 to $40,000 and up

Your Property Guide’s budget band repeats the Three Birds band, so that is not independent agreement. The two differ on the middle. Your Property Guide describes its standard band as an in-place refresh with fixtures in the same positions, and says it includes GST. Its premium band covers premium tiles, a frameless screen and possible layout changes. Three Birds also cites the HIA average of around $26,000.

Is an ensuite cheaper than a main bathroom?

Yes. Your Property Guide quotes CKA figures for Sydney from June 2026. They exclude GST and are not the same basis as the table above.

Level Main bathroom Ensuite
Standard $13,360 to $22,810 $8,490 to $13,090
Quality $20,640 to $32,150 $15,020 to $21,200
Luxury $32,000 to $50,360 $22,540 to $34,090

An ensuite has less floor and wall area to waterproof and tile. The size of the wet area drives the price.

A pink tiled bathroom with a bath and shower screen, before any renovation The sample photo used for the three budgets below. An original photo, not generated.

What does the same bathroom look like at three budgets?

The next three images start from the same photo. The room shape, window, door and camera angle stay as photographed. Only the finishes change.

Cosmetic refresh. Keep the layout and tiles. Regrout, add a clear glass screen, a small vanity and new tapware, and lay a new floor.

The same bathroom as a refresh with pink tiles regrouted, a glass bath screen, a small white vanity and matte black tapware Generated with remyhomeai’s AI model from one sample photo.

Mid-range. Keep the layout. New wall tiles, a new bath and screen, a wall-hung vanity and new floor tiles.

The same bathroom as a mid-range renovation with sage green wall tiles, a white bath and a timber vanity Generated with remyhomeai’s AI model from one sample photo.

Premium. The same room with a walk-in shower, a freestanding bath, large-format tiles and wall-mounted tapware.

The same bathroom as a premium renovation with a freestanding bath, a walk-in shower and large terrazzo-look tiles Generated with remyhomeai’s AI model from one sample photo.

These images show looks. They do not price a job or confirm that a layout works.

What does waterproofing cost, and what are the rules?

Your Property Guide gives $1,500 to $3,000 to waterproof a bathroom, and says to redo it to AS 3740. Its warning is plain: “Waterproofing is not the place to cut corners.” What’s The Damage gives a wider range of $700 to $3,500, with $1,400 typical. The size of the room and the number of wet surfaces change the price.

AS 3740 is the Australian Standard for waterproofing domestic wet areas. The National Construction Code points to it. In the NCC 2022 Housing Provisions, Part 10.2 on wet area waterproofing says that building elements in wet areas must comply with AS 3740. It says the floor of a shower area must be waterproof, including any hob or step-down. The shower rules also cover walls, wall junctions and penetrations.

A tradesperson in grey gloves rolling grey-blue waterproofing membrane over reinforcing tape at a shower wall and floor corner, beside a linear drain An illustration for this article.

What’s The Damage says the membrane needs 24 to 48 hours to cure before tiling can begin. DCON Group says the membrane must cure before tiles go on. Allow for that gap in the schedule.

State and territory rules decide who may do the work and which certificate or inspection applies. Council approval also varies. Ask your builder which rules apply to your job, and check the licence of each tradesperson on your state regulator’s public register. If your job needs a permit, Three Birds says council fees can range from $500 to $1,000 for a basic bathroom, and larger projects can cost more.

What drives the price of a wet area renovation?

  • Size of the wet area. More floor and wall area means more membrane, tiles and labour.
  • Tiling. Your Property Guide gives tiling labour at $60 to $120 per m2, with materials extra. At those rates, 25 m2 of tiling is $1,500 to $3,000 in labour.
  • Tapware. Your Property Guide gives $300 to $700 per outlet for quality tapware and $700 to $1,500 for designer finishes such as brushed brass or matte black.
  • Moving plumbing. Moving the toilet, shower or waste is a larger job than swapping fixtures in place. Ask your plumber for the rough-in and fit-off prices separately.
  • Labour share. Three Birds says labour can account for 40 to 50% of the total budget.
  • City. Your Property Guide quotes CKA adjustments against Sydney for renovation work in general: Melbourne minus 1%, Brisbane plus 4%, Perth plus 5%, Adelaide and Hobart 0%, and regional areas plus 5 to 15%.

A tiler’s gloved hands laying a pale speckled floor tile on the dry floor beside a membrane-coated shower floor with a linear drain An illustration for this article.

How long does a bathroom renovation take?

DCON Group, a Sydney builder, gives these estimates:

  • Small makeover without plumbing changes or tiling: 1 to 2 weeks once materials are delivered.
  • Standard renovation: 4 to 6 weeks.
  • Larger structural or luxury job: 8 weeks or more, depending on permits, materials and problems found during demolition.

What’s The Damage gives 3 to 6 weeks for a full renovation and 3 to 5 days for a cosmetic refresh. Your Property Guide says to expect a wait of 6 to 12 weeks to engage a quality builder for anything substantial. That wait comes before the work starts.

How can you save money on a bathroom renovation?

  • Keep the plumbing where it is. Moving fixtures adds to the bill. A same-position refresh avoids that cost.
  • Quote the laundry together. If your laundry shares a wall with the bathroom, ask for one quote for both wet areas. The laundry room ideas post shows what a laundry can look like.
  • Choose tiles and tapware early. Late changes during the build cost more than choices made before demolition.
  • Ask whether GST is included. Your Property Guide’s standard band includes GST. The CKA figures it quotes exclude it. Compare quotes on the same basis.
  • Hold back a contingency. Three Birds recommends an extra 10 to 20% for unexpected costs.

How can a design preview help before you get quotes?

You can decide the look before you pay a builder. Upload one photo of your bathroom to remyhomeai, choose bathroom as the room type and see it in a style such as modern or minimalist. Try tile colours, vanity styles and tapware on your own room. Tick Keep on the windows and doors to lock them. The bathroom page explains how this works. The porcelain vs ceramic tile post compares the two main tile types, and small bathroom ideas covers layout and storage in a tight room.

What remyhomeai does not do

remyhomeai cannot quote a job or say what your bathroom costs. It does not plan or check waterproofing, drainage or plumbing, and it draws no floor plans. Walls, windows, doors and the camera angle stay as photographed, so a shower in an image is an idea, not a measured design. A builder or designer must measure the room and price the job.

Sources

Prices reviewed October 2026.

Try it on your own room. See your room in a new style with 3 free credits at signup, no card required. One credit is one room photo.

Frequently asked questions

How much does a bathroom renovation cost in Australia?

Three Birds Renovations, citing hipages, gives $8,000 to $15,000 for budget, $15,000 to $35,000 for standard and $35,000 or more for premium. It also cites a Housing Industry Association average of around $26,000.

How much does bathroom waterproofing cost?

Your Property Guide gives $1,500 to $3,000 for waterproofing a whole bathroom. What's The Damage gives $700 to $3,500, with $1,400 typical. Size and the number of wet surfaces change the price.

How long does a bathroom renovation take in Australia?

A Sydney builder, DCON Group, gives 4 to 6 weeks for a standard renovation and 8 weeks or more for larger jobs. What's The Damage gives 3 to 6 weeks. Your Property Guide says to expect a 6 to 12 week wait to engage a quality builder.

Do bathroom renovation prices include GST?

It depends on the source. Your Property Guide says its standard band includes GST, while the CKA figures it quotes for Sydney exclude GST. Ask each tradesperson to state whether the quote includes GST.

Keep reading

Redesign your first room today

3 free credits at signup, one per room photo. No card required.

Start designing free